CTR
>
>
08mm potentiometer
1/1
Number of views:
1001

08mm potentiometer

Specifications:         MechanicalcharacteristicsItemsSpecificationsConditionRotationaltorque(gf.cm)20~150gf.cm (Afterwavesolderingtestand10000cycletest)Push-pullstrengthShaftPush-pullstrength:10Kgf.c
Retail price
0.0
RMB
Market price
0.0
RMB
Number of views:
1001
Product serial number
Quantity
-
+
Stock:
0
1
Product description

Specifications:           

 

Mechanical characteristics
Items Specifications Condition
Rotational torque (gf. cm) 20~150 gf.cm  (After wave soldering test and 10000cycle test)
Push-pull strength Shaft Push-pull strength:10Kgf.cm min(with 2 bushing guide pins fixed to PCB
Total rotational angle 300°
topper strength 7Kgf.cm min
Electrical characteristics
Items Specifications Condition
End resistance(Terminal :1-2, 2-3) R≤10KΩ:≤10Ω; 10KΩ<R≤250KΩ:≤20Ω; R>250KΩ:≤0.1% R
Ratings power

B Taper : 0.05W, Other taper : 0.025W 

Maximum operating voltage

B Taper :10V AC or 50V AC,Other taper : 5V DC or 25V AC

Insulation resistance DC 250V,100MΩ以上  100MΩ min. at DC 250V
Dielectric strength 1 minute at 300V AC
Slider noise 100mV max (before reflow and cycle test)
Output signal Refer to attached drawing
Durability
Items Specifications Condition
Rotational life Permissible resistance change after 15,000±200 cycles on 600 r.p.h .without  load ±15% max.
Operating temperature -40℃~80℃

Note: If the description of the same with the recognition of the specification parameters, the picture is different, have admitted that the book shall prevail.  

 

Outline:

We could not find any corresponding parameters, please add them to the properties table

Copyright 2017  Dongguan Changtaier Electronic Co., Ltd. All Rights Reserved.  粤ICP备05100315号     Powered by www.300.cn