
Linear sliding potentiometer
Specifications:
Mechanical characteristics | ||
Items | Specifications | Condition |
Rotational torque (gf. cm) | 20 to 200 gf.cm at 20℃ 500gf.cm max at -30℃ | |
Push-Pull Strength | 3Kgf max.at | |
Sliding distance | 15/20/30/45/60 | |
stopper strength | 3Kgf.cm min | |
Electrical characteristics | ||
Items | Specifications | Condition |
End resistance | Term 1~2:Less than 20Ω Term 2~3:Less than 20Ω | |
Ratings power | Taper B: 0.2W Other taper: 0.1W | |
Maximum operating voltage | Taper B:AC220V Other taper:AC150V | |
Insulation resistance | DC 250V,100MΩ以上 100MΩ min. at DC 250V | |
Dielectric strength | AC 300V 1分钟以上 1 minute at 300V AC | |
Slider noise | 100mV max (before reflow and cycle test) | |
Output signal | Refer to attached drawing | |
Durability | ||
Items | Specifications | Condition |
Rotational life | Permissible resistance change after 10,000±200 cycles on 600 r.p.h .without load ±15% max. | |
Operating temperature | -20℃~60℃ |
Note: If the description of the same with the recognition of the specification parameters, the picture is different, have admitted that the book shall prevail.
Outline:
Copyright 2017 Dongguan Changtaier Electronic Co., Ltd. All Rights Reserved. 粤ICP备05100315号 Powered by www.300.cn