CTR
>
>
Linear sliding potentiometer
1/1
Number of views:
1001

Linear sliding potentiometer

Specifications:      MechanicalcharacteristicsItemsSpecificationsConditionRotationaltorque(gf.cm)20to200gf.cmat20℃  500gf.cmmaxat-30℃Push-PullStrength3Kgfmax.atSlidingdistance15/20/30/45/60stopperstre
Retail price
0.0
RMB
Market price
0.0
RMB
Number of views:
1001
Product serial number
Quantity
-
+
Stock:
0
1
Product description

Specifications:          

 

Mechanical characteristics
Items Specifications Condition
Rotational torque (gf. cm) 20 to 200 gf.cm at 20℃   500gf.cm max at -30℃
Push-Pull Strength 3Kgf max.at
Sliding distance 15/20/30/45/60
stopper strength 3Kgf.cm min
Electrical characteristics
Items Specifications Condition
End resistance Term 1~2:Less than 20Ω    Term 2~3:Less than 20Ω
Ratings power Taper B: 0.2W   Other taper: 0.1W
Maximum operating voltage Taper B:AC220V   Other taper:AC150V
Insulation resistance DC 250V,100MΩ以上  100MΩ min. at DC 250V
Dielectric strength 1 minute at 300V AC
Slider noise 100mV max (before reflow and cycle test)
Output signal Refer to attached drawing
Durability
Items Specifications Condition
Rotational life Permissible resistance change after 10,000±200 cycles on 600 r.p.h .without  load ±15% max.
Operating temperature -20℃~60℃

Note: If the description of the same with the recognition of the specification parameters, the picture is different, have admitted that the book shall prevail.  

 

Outline:

We could not find any corresponding parameters, please add them to the properties table

Copyright 2017  Dongguan Changtaier Electronic Co., Ltd. All Rights Reserved.  粤ICP备05100315号     Powered by www.300.cn