CTR
>
>
Linear sliding potentiometer
1/1
Number of views:
1001

Linear sliding potentiometer

Specifications:        MechanicalcharacteristicsItemsSpecificationsConditionRotationaltorque(gf.cm)20to200gf.cmat20℃  500gf.cmmaxat-30℃Push-PullStrength3Kgfmax.atSlidingdistance15/20/30/45/60stopperst
Retail price
0.0
RMB
Market price
0.0
RMB
Number of views:
1001
Product serial number
Quantity
-
+
Stock:
0
1
Product description

Specifications:              

 

Mechanical characteristics
Items Specifications Condition
Rotational torque (gf. cm) 20 to 200 gf.cm at 20℃   500gf.cm max at -30℃
Push-Pull Strength 3Kgf max.at
Sliding distance 15/20/30/45/60
stopper strength 3Kgf.cm min
Electrical characteristics
Items Specifications Condition
End resistance Term 1~2:Less than 20Ω    Term 2~3:Less than 20Ω
Ratings power Taper B: 0.2W   Other taper: 0.1W
Maximum operating voltage Taper B:AC220V   Other taper:AC150V
Insulation resistance DC 250V,100MΩ以上  100MΩ min. at DC 250V
Dielectric strength AC 300V 1分钟以上
Slider noise 100mV max (before reflow and cycle test)
Output signal Refer to attached drawing
Durability
Items Specifications Condition
Rotational life Permissible resistance change after 10,000±200 cycles on 600 r.p.h .without  load ±15% max.
Operating temperature -20℃~60℃

Note: If the description of the same with the recognition of the specification parameters, the picture is different, have admitted that the book shall prevail.  

 

Outline:

We could not find any corresponding parameters, please add them to the properties table

Copyright 2017  Dongguan Changtaier Electronic Co., Ltd. All Rights Reserved.  粤ICP备05100315号     Powered by www.300.cn