
RF connector
Specifications:
Mechanical characteristics | ||
Items | Test Condition | Performance |
Durability | Test 500 times at a speed of 5 revolutions per minute | Electrical performance is not reduced,contact impedance is less than 100 mΩ,products without damaged ,no cracks,no loosening |
Normal Force | The antenna mounting sleeve should bear 1.7 N-M MIN. Torque (15 LBF-IN) | |
Electrical characteristics | ||
Items | Test Condition | Performance |
Contact resistance | Measure the contact resistance between the terminals with 100mA. | 50mΩ MAX below 50mΩ. |
Insulation resistance | A voltage test of 100 V DC for 1 minute was applied between adjacent terminals and between the terminals and the case | 1000MΩ above 1000MΩ MIN. |
Withstand voltage | A voltage test of DC 100 V / 1 minute was applied between adjacent terminals. | No breakdown occurs, the leakage current is less than 5mA |
Frequency test |
SWR Frequency DC 1000 MHZ Insert loss Frequency DC 1000 MHZ |
SWR ≤1.15 Insert loss ≤0.1db |
Water proof:IP68 | Vacuum pressure: 9.0-9.5 inHg; duration: 5 seconds | Holdtime:10s;pressure drop :less than or equal to 0.04inHg |
Voltage |
30V RMS |
|
Frequency range |
DC 1000 MHZ |
|
Input / output impedance |
50Ω |
|
Operating temperature | -40℃~90℃ |
Note: If the description of the same with the recognition of the specification parameters, the picture is different, have admitted that the book shall prevail.
Outline:
Copyright 2017 Dongguan Changtaier Electronic Co., Ltd. All Rights Reserved. 粤ICP备05100315号 Powered by www.300.cn