11mm incremental encoder
| Mechanical characteristics | ||
| Items | Specifications | Condition |
| Rotational torque (gf. cm) | 1.5±0.5 N.CM | |
| Push-pull strength | Push/Pull 10Kgf | 10Kgf.cm for 15 seconds |
| Total rotational angle | 360 ° | |
| Number of detent | 16 | Rotate a week (360 °) positioning number |
| Electrical characteristics | ||
| Items | Specifications | Condition |
| Rating(max.) | 10 mA DC12V | |
| Current rating | 2.5mA | Common terminal shall be withstanded at 5 mA |
| Insulation resistance | 100MΩMIN | At DC 250V |
| Dielectric strength | No subversion on insulating material | AC300V(50~60HZ) 1 minute |
| Output signal | Refer to attached drawing | |
| Number of pulses | 8 |
Output total pulses of rotate one circle(360°). |
| Phase difference | Td=T/4±T/6 < T=cycle > |
In no detent circumstances |
| Durability | ||
| Items | Specifications | Condition |
| Rotational life | Encoder shall be operated30,000 cycles without load | 16~20 times per minute |
| Waterproof level | IP67 | |
| Operating temperature | -30℃~80℃ | |
Note: If the description of the same with the recognition of the specification parameters, the picture is different, have admitted that the book shall prevail.
Outline:
Copyright 2017 Dongguan Changtaier Electronic Co., Ltd. All Rights Reserved. 粤ICP备05100315号 Powered by www.300.cn