11mm incremental encoder
Specifications:
| Mechanical characteristics | ||
| Items | Specifications | Condition |
| Rotational torque (gf. cm) | 20~200gf.cm | After 20,000 cycles |
| Push-pull strength | Push/Pull 10Kgf | 10Kgf.cm for 15 seconds |
| Total rotational angle | 360 ° | |
| Number of detent | 16/20/24/30 | Rotate a week (360 °) positioning number |
| Electrical characteristics | ||
| Items | Specifications | Condition |
| Voltage rating | DC 5V | |
| Current rating | 2.5mA | |
| Insulation resistance | 100MΩ以上 100MΩMIN | At DC 250V |
| Dielectric strength | No subversion on insulating material | AC300V(50~60HZ) 1 minute |
| Output signal | Refer to attached drawing | |
| Number of pulses | 8/12/15/20 |
Output total pulses of rotate one circle(360°). |
| Phase difference |
Td = T / 4 ± T / 6 |
In no detent circumstances |
| Durability | ||
| Items | Specifications | Condition |
| Rotational life | Encoder shall be operated30,000 cycles without load | 16~20 times per minute |
| Waterproof level | IP67 | |
| Operating temperature | -30℃~80℃ | |
Note: If the description of the same with the recognition of the specification parameters, the picture is different, have admitted that the book shall prevail.
Outline
Copyright 2017 Dongguan Changtaier Electronic Co., Ltd. All Rights Reserved. 粤ICP备05100315号 Powered by www.300.cn