11mm incremental encoder
Specifications:
| Mechanical characteristics | ||
| Items | Specifications | Condition |
| Rotational torque (gf. cm) | 20~150gf.cm | |
| Push-pull strength | At the shaft end, a static load of 8 Kg is applied in the axial direction to push and pull each for 10 seconds | After soldering of the PC board |
| Total rotational angle | 360 ° | |
| Number of detent | 20/30 | Rotate a week (360 °) positioning number |
| Electrical characteristics | ||
| Items | Specifications | Condition |
| Voltage rating | DC 5V | |
| Maximum operating current (resistive load) |
Each lead: 0.5mA(Max 5mA;Min 0.5mA) Common lead:1mA(Max 10mA;Min 0.5mA) |
|
| Insulation resistance | 100MΩ以上 100MΩMIN | At DC 250V |
| Dielectric strength | No subversion on insulating material | AC300V(50~60HZ) 1 minute |
| Output signal | Refer to attached drawing | |
| Number of pulses | 15/20 |
Output total pulses of rotate one circle(360°). |
| 相位差 Phase difference |
Td = T / 4 ± T / 6 |
In no detent circumstances |
| Durability | ||
| Items | Specifications | Condition |
| Rotational life | Encoder shall be operated30,000 cycles without load | 16~20 times per minute |
| Operating temperature | -30℃~80℃ | |
Note: If the description of the same with the recognition of the specification parameters, the picture is different, have admitted that the book shall prevail.
Outline
Copyright 2017 Dongguan Changtaier Electronic Co., Ltd. All Rights Reserved. 粤ICP备05100315号 Powered by www.300.cn