10mm absolute encoder
Specifications:
| Mechanical characteristics | ||
| Items | Specifications | Condition |
| Rotational torque (gf. cm) | 100~400gf.cm | |
| Push-pull strength | Push/Pull 10Kgf | 10Kgf.cm for 15 seconds |
| Total rotational angle | 337.5 ° | |
| Number of detent | 16 | Rotate a week's positioning number |
| Electrical characteristics | ||
| Items | Specifications | Condition |
| Voltage rating | DC 5V | |
| Voltage current | 1 m A | Common terminal shall be withstanded at 2 mA (with load) |
| Max. operating current | 2 mA | |
| Contact resistance | Contact resistance (ON) 500mΩmax | After being rotated several times,measured by voltage decreasing method at 5V DC 1A of less than 2mv 1k HZ |
| Insulation resistance | 100MΩMIN | At DC 250V |
| Dielectric strength | No subversion on insulating material | AC300V(50~60HZ) 1 minute |
| Output signal | Refer to attached drawing | |
| stopper strength | 3Kgf.cm |
|
| Durability | ||
| Items | Specifications | Condition |
| Rotational life | Encoder shall be operated10,000 cycles without load | 16~20 times per minute |
| Operating temperature | -20℃~60℃ | |
Note: If the description of the same with the recognition of the specification parameters, the picture is different, have admitted that the book shall prevail.
Copyright 2017 Dongguan Changtaier Electronic Co., Ltd. All Rights Reserved. 粤ICP备05100315号 Powered by www.300.cn