10mm absolute encoder
Specifications:
| Mechanical characteristics | ||
| Items | Specifications | Condition |
| Rotational torque (gf. cm) | 200~500gf.cm | |
| Push-pull strength | Push/Pull 10Kgf | 10Kgf.cm for 15 seconds |
| Total rotational angle | 337.5 ° | |
| Number of detent | 16 | Rotate a week's positioning number |
| Electrical characteristics | ||
| Items | Specifications | Condition |
| Voltage rating | DC 5V | |
| Voltage current | 1 m A | Common terminal shall be withstanded at 2 mA (with load) |
| Max. operating current | 2 mA | |
| Contact resistance | Contact resistance (ON) 500mΩmax | After being rotated several times,measured by voltage decreasing method at 5V DC 1A of less than 2mv 1k HZ |
| Insulation resistance | 100MΩMIN | At DC 250V |
| Dielectric strength | No subversion on insulating material | AC300V(50~60HZ) 1 minute |
| Output signal | Refer to attached drawing | |
| stopper strength | 4Kgf.cm |
|
| Durability | ||
| Items | Specifications | Condition |
| Rotational life | Encoder shall be operated10,000 cycles without load | 10~15 times per minute |
| Operating temperature | -30℃~70℃ | |
Note: If the description of the same with the recognition of the specification parameters, the picture is different, have admitted that the book shall prevail.
Outline:
Copyright 2017 Dongguan Changtaier Electronic Co., Ltd. All Rights Reserved. 粤ICP备05100315号 Powered by www.300.cn